Turbo Inlet Adaptor for the VW Golf Mk8 GTI, Audi A1, A3, TT & CupraSuitable for both left and right hand drive This replaces OEM part number 5WA. 129. 635 With the success of turbo inlet adaptors for a number of platforms and engine configurations we took the opportunity to further our product range for the VW MK8 GTI. We looked to see if we could improve on the air flow to the turbo charger. On investigation we could see that the OEM turbo adaptor was restrictive and was an area in need for improvement. Therefore,

as well as the shifter in situ

We've got that covered too

resulting in diaphragm splitting and boost leak

Large range of damping adjustment

In The Box:

OEM Number: 33171134871

This particular failure also results in the valve falling apart upon removal from the turbo

On the stage 1 car we tested on (with map and exhaust modifications)

1 x 3 port Solenoid and fixings

Please note: this product will NOT fit the 1

1 x 2 Metres of Vacuum Hose

This means the hoses are suitable to be used with either modern long-life coolants