3mm Red/Green Bi-Colour (Common Cathode) 3 Pin LED Small LegsA small red and green bi colour 3mm light emitting diode with a common cathode that produces consistent light and consumes little power, contained in a milky white packaging. It is suitable for PCB or panel mounting. In a shared cathode design, diodes are linked. The common cathode is the centre leg, and it is the place where a resistor should be installed for the protection of the LED. Pin Configuration Pin Name Description Anode Positive terminal of

Resistance 10 ohm (10R0) Brand Resistor Chip size 0805 Tolerance 1% Power 1/8W Temperature Range -55°C to +125°C Mounting Type Surface mount No

Voltage and Current Rating Max 16A at 250VAC and 20A at 125VAC Switching Mode ON-OFF Structure DPST Function Momentary Colour Black Number of Pins 4 Dimension (LxWxH) 31x25x34 (mm) Panel Cut-Out(LxW) 31x22(mm) Material Plastic and Copper

press the button of the remote control(the one you wish to control the receiver with)

Support for the Arduino IDE 1

and in DIY Projects

It is a high-end Bourns preset

Features Fast Response

DC input Voltage 35V Tolerance 4% Operating temperature 0°C to 125°C

these transceivers consume between 120A and 500A of supply current

RGB LED module

and solder float

Appearance is like butter-soft paste