AHQX24-MFT-100 | Belimo | Damper ActuatorConfigurable, Damper Actuator, 44 lbf [200 N], Non fail safe, AC DC 24 V, DC 2 10 V For proportional modulation of dampers in HVAC systems. Actuator sizing should be done in accordance with the damper manufacturers specifications. The default parameters for 2 to 10 VDC applications of the MFT actuator are assigned during manufacturing. If necessary, custom versions of the actuators can be ordered. The parameters can be changed by two means: pre set

Probe length 8" [200 mm]

NTC10k3 (Precon)

Supervisor 25 field Device pack (Standard drivers included)

360 in-lb [40 Nm]

LMX24-SR Damper Actuator

AMX120-SR Damper Actuator

The actuator will meet requirements of UL555 and UL555S when tested as an assembly with the damper and will meet requirements of UBC for 15 second opening and closing at 350°F

Duct Sensor CO2 / Temperature active

Room Sensor Temperature passive

Auto reset

and additional utilities

1 inch WC [0