1/4" Tubing 50 Inches Long With 90 Deg Bend One End 7/16-24 Fittings Each End StainlessInline Tube's pre fabricated tubing comes with 45 degree double flares on each end and is available in various lengths and fittings. This is our long lasting stainless steel tubing that is double annealed for supreme workability. All pre fabricated tubing has a . 028 wall thickness. This pre fabricated tube has a 90 degree bend on one end and is 50 in total length including the 1 4 tube and 7 16 24 stainless fittings. Bending, flaring, and

1957-58 Ford Fairlane

This clip kit includes all clips necessary to secure all the fuel lines to the chassis of the car: seven double clips

This clip kit includes all clips necessary to secure all the fuel lines to the chassis of the car: eight R style clips and eight bolts

This clip kit includes all clips necessary to secure the brake lines to the chassis of the car: seven 1/4” pipe clamps

1968-1972 Oldsmobile Cutlass &1968-1972 Buick Skylark Manual Trans Clutch Push Rod 1pc

1964-77 GM A-Body Manual Transmission Bell Housing Inspection Cover Bolts 3pc

This pre-fabricated tube has a 90-degree bend on one end and is 20” in total length including the 3/8” tube and 5/8”-18 stainless fittings

1973-80 Chevrolet GMC Truck Blazer Jimmy 2WD 3/8" Power Steering Return Line

1964 Pontiac A-Body Radio Suppression Ground Straps With Bolts 7pc

These preformed power steering lines will replace the return lines running from the steering box to the power steering pump

1968-72 GM A-Body Side Quarter Window Pillar Seals 2pc

This pre-fabricated tube has a 90-degree bend on one end and is 30” in total length including the 1/4” tube and 7/16”-24 stainless fittings