BTS 6 M5 W 316 Stainless Steel Branch Tee Push In FittingOperating Pressure Range 0 250 PSI (0 1650 kpa) Vacuum 0 30 Hg (760 mm Hg) Operating Temperature 5 230F ( 15 to 110 C) Recommended Tubing Material Polyurethane, Nylon, Polyethylene, Polypropylene, and Hard Metal Tubing (must be pre grooved) Body Material T316 Stainless Steel Release Button300 Series Stainless Steel Grip Ring or Collet 300 series Stainless Steel O ring Viton Thread Sealant None Service Air or LiquidSterilization Tempurature Up to 280F

The kit includes Riser Block

Documentation

Click here for spec sheet: UCTRS Spec Sheet

Bost-Bronz® is Boston Gear’s all-purpose

and 6-foot lengths

always remember that the difference in the number of teeth between the internal gear and pinion should not be less than 15 (14 1/2° PA) or 12 (20° PA)

This means that the brass insert is a permanent part of the strain relief

Cross fittings provide four pipe thread connections

The Durawhip® was designed to be installed on a jackhammer as a lightweight whip hose

Coilhose Air Tool Lubricant is specially formulated to prolong the life of air tools and accessories

3/16"Bore= #4-40 setscrew

Ear Clamp Pincers are required to correctly install ear clamps