MAD Wurks Carbon 1 Piece Topdeck 2mm Schumacher Mi9 (1)MAD Wurks Carbon 1 Piece Topdeck 2mm Schumacher Mi9 (1) Racers asked for a more rigid rear 1 piece top deck. So we added additional top deck hole options, added a second rear bridge, and provided a bulkhead brace as well. To add additional flex to suit your needs, you can cut one or multiple bridges out as well as the rear bulkhead brace. You also can cut from the front slot into the adjoining screw hole. This allows much more torsional twist. Adding

This was done to increase durability with thinner top decks

50% polyester

Quickly remove the shims by loosening the screws and using a small pick or 1

2mm front top deck

• Double seam at sleeves and bottom hem

2mm rear top deck with stiff brace

2mm front top deck with a rear 2mm top deck if you need to keep a more direct feel up front

This topdeck is designed to provide a more direct feel than traditional top decks

leave the front bulkhead flex connector in place

These roll center shims are can be installed without unscrewing the ball completely from the screw for quick roll center changes

2mm carbon fiber top deck for the Team Associated TC8 provides a good middle ground between the stock 2

MAD Wurks 2mm Carbon Fiber Front Top Deck TC8 (1)