Blacksmith Harness Riddling GrateThe Blacksmith Harness Riddling Grate is the cast iron grate assembly for the Blacksmith Harness stove, used to shake ash from the fire bed into the ash pan below. Riddling grates wear out over time from the combination of heat and mechanical stress, eventually burning through or bending beyond use. Compatible with: Blacksmith The Harness stove Specifications Material: Cast iron Heat resistance: 650C Part type: Riddling grate The riddling grate sits

controlled combustion

This part is a direct replacement for the Elessar

to prevent logs or solid fuel from falling against the stove glass or door

or the seal at the flue joint breaks down

Cast iron baffles on this model are rated for prolonged high-heat use but should be inspected annually and replaced when cracked or badly warped

and stops excess air from entering around the glass panel

Part type: Grate riddling rod with knob

They are a consumable part of normal stove use and are worth checking annually alongside the other fire bricks

keeps combustion steady

Replacing worn hinges restores proper door alignment and sealing

The riddling grate for the Blacksmith Anvil sits at the centre of the firebox floor

Replacing a warped or cracked grate frame restores the structural integrity of the grate assembly and re-establishes proper airflow through the fuel bed