Tools for pressing. Sliding plates1 Scope This International Standard specifies the main dimensions and tolerances of sliding plates, to be used in press tools (an application example is shown in Figure 1). It also specifies the designation of sliding plates. Figure 1 Application example of sliding plates 1 sliding plates, type A 2 sliding plates, type B

if they are effective in achieving compliance with the requirements of this part of BS EN ISO 11737

Using BS 7431 you can specify a means of assessing elastomeric materials for use in the manufacture of absorbers

self-drilling and machine screws

BS QC 221100 recommends the preferred climatic categories according to the temperature range

BS 5194-3 on the specification for dissecting forceps is useful for:

and reference is made to “UKAS” rather than “NAMAS” as per current terminology

BS EN 2591-702 specifies a method of measuring the signal distortion of couplers

Why should you use BS IEC 62526 - Extensions to STIL for semiconductor design environments

This document provides the principles that govern the development of incident type and/or hazard specific test methods and minimum performance requirements for protective gloves for firefighters while engaged in specific rescue activities

Who is BS EN 2240-034 - Incandescent lamps

The principle of this standard is that a qualification test qualifies the welder not only for the conditions used in the test

Preparation of standard glasses for evaluating apatite-forming ability