Quick change tapping chuck HSK 100 - M14-M36 - Gr.3Application: For the chucking of quick change adaptors for taps. Note: For machining centres with synchronous spindle. All holders are made of forged steel Specific, low warpage hardened Surface hardened HRC 58~60 Hardening depth 0,8mm~0,9mm Taper angle tolerance < AT 3 according to DIN 2080 Surface roughness Ra < 0,4 m Tensile strength in the core of min. 800 N mm after DIN All functional surfaces fine machined

Setting angle: 93°

3 / L2=63 HA polished Split Point - Valuetool

Collet chucks and wrenches to be ordered separately

ADJRGA = Length adjustment range

For the storage of collet chuck

In machining centres (machines with automatic tool changers)

d = 40/d = 60: For large diameter face mill cutters with four additional threaded holes according to DIN 2079

For mounting straight-shank tools in collet chucks DIN 6499

For clamping tools with Morse taper shank and thread according to DIN 228-1 form A

prevents chip clogging

right angularity: 0

thin thread and pitch diameter oversize