4 Pin TVS Cable Connector Female with WireThis is a 4 Pin female TVS connector. It prevents cable connection errors. It allows cost effective connections between circuit boards that are either permanent connections or removable connections. They're also great for use as a general purpose connector in any project. The wire leads are 25cm long and terminated on one end with a TVS connector and the other with bare tinned wire. These are polarised Female connectors with a latching connection to

Connect to the ground to activate the regulator or connect to Vcc to disable the regulator

Maximum AC load current 8A @ 250/125V AC Maximum DC load current 10A @ 30/28V DC Trigger Voltage (Voltage across coil) 12V DC Trigger Current (Nominal current) 45mA Operating time 10msec Release time 5msec Dimension 28

and Capture Mode

The diode is a device that allows current flow through only one direction

A sheathed or shielded wire means that the main conductor cable is insulated

This switch has two positions i

Requires no external components can be powered from data line

The BiCMOS technology combines the strengths of two different process technologies into a single chip: Bipolar transistors offer high speed and gain

This is a - SMD Resistor with a resistance of 15 ohm (15E)

These are Carbon Film Resistor with a value of 470k ohm 1/8W and tolerance of ±5%

7k ohm (2701) Brand Resistor Chip size 0805 Tolerance 1% Power 1/8W Temperature Range -55°C to +125°C Mounting Type Surface mount No

3k ohm 1/8W and tolerance of ±5%