Bi750-22.5 | Bi750 Near-IR Interference Bandpass FilterThe MidOpt Bi750 22. 5 can be used with 750 nm IR illumination to highlight dyes used in labeling, packaging, and manufacturing. These markings often do not stand out when viewed under visible, white, or colored light. Use of a Bi750 placed filter over the camera sensor or the cameras objective lens can eliminate interfering visible and longer wavelength near IR light, greatly improving contrast detection. All MidOpt filters can also be purchased

The MidOpt SP730-95 is a heat-resistant filter that reduces IR radiation/camera bloom

Advanced Illumination DL15124-940I3S Downloads:

APG 24C-DT

The diameter of the filter or lighting to which step-down rings are coupled will be much smaller than the diameter of the lens (often resulting in vignetting)

Gigabit Cable with RJ45 Straight connector to 10 meter SSTP (CAT 6) cable to RJ45 Vertical W/Thumbscrews connector

TC4MHRP036-C Technical Specifications:

SL-S100150M-660 Specifications:

The LCHPX1200-850-3 line scan light from Smart Vision Lights is part of SVL's LCHPX series of low-cost

Specifications + Useful Range Min 400 nm Useful Range Max 2000 nm Adhesive Backed Yes Tolerance 3 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Clear Glass Filter Diameter M25

JAI's FS-3200T-10GE-NNC is a 3-CMOS multispectral prism camera providing simultaneous images of three different spectral bands in a single camera - a visible color channel from 400-670 nm

The MidOpt LA120-105 counteracts the ~120 mired color shift created by traditional white LEDs (appearing very bluish in cast) as well as some similar xenon and metal halide lighting

25 in / 539