99170 - SKF Speedi-Sleeve - Max. Shaft Diameter 44.25mmWhen wear and damage occur on a shaft, SKF Speedi Sleeves are the solution. In order to perform their function properly, shaft seals must be seated on a smooth, round shaft face. If the shaft face becomes worn the seal can no longer perform as necessary, and, over time, will allow contaminants to enter the component and cause further damage to both the shaft and the component. Simply replacing the seal will not repair the damage to the shaft and

Two Stamped Steel Cages Cylindrical Bore Steel Cage Normal Radial Internal Clearance Annular Groove and Three Lubrication Holes in the Outer Ring

Manufactured to SKF’s high standards

BTM 130 B /P4C DB A High-Speed Design Double Direction Angular Contact Thrust Bearing 130mm - Bore Size 40° Contact Angle Precision Rating ISO Tolerance Class 4 Two Bearings Arranged Back-to-Back Light Preload Key Features

This 23052EJW507C08C3 bearing is a spherical roller bearing with a 2-piece Steel Cage

This 33024dfc250 bearing is a metric taper roller bearing

This 67985-90144 bearing is an imperial taper roller bearing

The dimensions of the SKF NU319ECJ/C3 bearing are 95x200x45mm

239 92 CA W33 Very Light 460mm - Bore Size Retaining Flanges on the Inner Ring

The bearing's dimensions are 170x310x110

6814 2rs1 Bearing Steel Thin Section with a Bore Diameter of 70mm Two Rubber Seals Normal Internal Clearance

This 6417 SKF bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 85x210x52

Wide 140mm - Bore Size Increased Capacity Design Normal Radial Internal Clearance