Merging Technologies CON-D25-XLRM - DB25 to 8 XLR Male Output SnakeThe IOC DA8(P) modules connect the line outputs using DB25 D SUB connections. To connect the DSUB connection to the module, align the Male cable connector with the female DSUB port on the module. Then, with slight pressure, guide the connector into place. If your DSUB connector has retention screws on either side, then fasten them finger tight once the connector has been pushed into place. Note: The pinout of the DB 25 is as per AES59 (Tascam Analog).

your FaderPort will be automatically recognized and can be used to tweak virtually any plug-in parameter

can also be mounted in one of the spare XLR connector positions

The bookshelf-sized free standing system is a small giant that clearly emits 109 dB of sound output from an 80-watt amplifier/mixer and thrills crowds of 500+ with 8 hours of extended battery life

Easy access stereo mono switch

you will find a fully featured user interface consisting of an LCD display

2 BA 70 rechargeable battery packs

0 charging specification that enables simultaneously charge and sync of iOS and other devices that support USB 3

Configuration choices allow the presence of interrupt audio to be recognized by voice-detect (VOX) or tone-detect (TOX) algorithms

SteadyClock(TM)

Provides 4-pin male XLR connector to support single-channel headsets

or if the full compressor/limiter will be used to substantially increase the average output power beyond that of a standard 18 W amplifier

Presentations