8AN ProClassic Swivel 45 Degree Hose End With Red/Blue FinishRussell Pro Classic Hose Ends are made from 6061 T6 aluminum and are completely reusable. They feature Russell's proven long taper design ensuring the ease of assembly. AN Standard 37 degree flare design. Russell Pro Classic Hose Ends work with all AN Male adapters. Use only with Russell Pro Classic hose for best results.

on the street and on the track

BMR recommends a 10-inch spring for spring rates 150lb/in or less

Eibach's PRO-PLUS KIT combines our legendary PRO-KIT lowering springs with our ANTI-ROLL-KIT front and rear stabilizer bars for a tuned suspension system

BMR Suspension designed the UTCA061 to work well in street performance

BMRs Bump Steer Kit

resulting in changes in alignment and reduced performance on the track and street

Eibach's PRO-DAMPER performance shocks are fine-tuned to match our lowering springs and provide improved damping for maximum response and ride quality

The fabricated laser cut

A billet aluminum spacer is used to attach the sway bar to the control arms in the factory location

and two holes below you have a full range of adjustment to get the bar angle where you want it at any ride height

The Corner Max system combines geometry-corrected A-arms with tall spindles and ball joints

The upper control arms are manufactured from 1