PA Pneumatic Vacuum Pump - PA250 & PA300A state of the art range of ejectors has allowed creating this range of pneumatic suction pumps featuring an excellent ratio between the amount of consumed air and sucked air, as well as the ability to adjust the vacuum level and capacity according to the supply air pressure. These pumps are supplied by compressed air with a pressure ranging from 1 to 6 bar (g), and they can produce a maximum vacuum of 90% and a suction capacity between 15 and 320 cum

as they limit the consumption of the compressed air supplying the pneumatic vacuum generators to the time strictly necessary to empty the vacuum cups

A silicone seal

A side slot on the support prevents the cup from rotating

inside of which are installed the ejectors

By activating the compressed air power micro solenoid valve

The pump is

These vacuum cups have been created as an alternative to the ordinary cups used in the robot-automotive field

on the same axis but on the opposite side

Product codes: VTLP25/FG VTLP30/FG VTLP35/FG

it tends to shift from the initial position (Bourdon effect)

They are recommended in all those cases that require a signal when a certain level of vacuum is reached

the power supply solenoid valve is deactivated by means of an electrical pulse while