BS EN 60335-2-39 AMD1. Household and similar electrical appliances. Safety. Part 2-39. Particular requirements for commercial electric multi-purpose cooking pans

On-site acceptance tests for newly installed electrical equipment are an important approach to judge whether the equipment is normal or abnormal after transportation and installation

24 and 26 mm in a selected range of chain centres and is clamped tight within the shackle type connectors

The principal technical changes in BS EN 60034-15:2009 with respect to BS EN 60034-15:1996 are as follows:

A suitability test is specified to check the behavior of the structural bolting assemblies

and BS 5385-3

Harm caused by inadequate or improper maintenance

BS EN 10225‑4 is the fourth part of a series of documents

The mechanical properties of the joint between a terminal to land on a printed wiring board using lead-free solder are not the same for the joint using tin-lead solder due to the difference in composing elements of the solders

Ultrasonic scanners are widely used in medical practice to produce images of soft-tissue organs throughout the human body

To estimate and control the effects of design changes on reliability

magnetic or electromagnetic field components at or near the surface of an integrated circuit (IC)

8 specifies methods for measuring hydrocarbon