BN450-30.5 | BN450 Narrow Indigo Bandpass FilterThe MidOpt BN450 30. 5 is commonly used in fluorescence applications with an emission range of 430 nm to 460 nm. It is suitable for use in LED or laser diode applications with higher than normal ambient lighting conditions and is less sensitive to variations in angle of incidence than traditional interference filters. The BN450 is an ideal filter for applications utilizing 450nm blue laser triangulation sensors. All MidOpt filters can also be

this model has the ability to operate in both constant on operation

157 Vertical Magnification 0

Advanced Illumination LL163D072-880I3S Downloads:

RL208M-050WHI24 Specifications:

2 mm AOV @ 1″ H°×V°×D° 14

0 Cable with A Type connector to 3 meter ROBOTIC cable to Exit Left w/Recessed Screws connector

Overcurrent Strobe - Dimmable Strobe Trigger Input External Driver Dependent Intensity Adjustment Type Analog Voltage Daisy Chain Yes Direct Connect Yes

0 Cable with A Type connector to 5 meter CHAIN FLEX cable to Straight Exit w/Thumbscrew connector

Analog Cable with 12 Pin Female Plug HR10A-10P-12S* connector with a connector orientation of Straight to 10 meter 24 AWG x 12C (I/O) cable to Flying Lead for End "B" ONLY connector

0x and 110mm 3

The MidOpt LP1000-39 cuts-on at 860nm and is most frequently used with infrared Vidicon or InGaAs cameras

Specifications + Useful Range Min 605 nm Useful Range Max 1100 nm Stabledge Yes Adhesive Backed Yes Tolerance 10 % Peak Transmission ≤ 90 % Surface Quality (Scratch-Dig) 40-20 Substrate Material Colored Glass Filter Diameter M77 x P0