HC-SR501 PIR Motion Sensor Detector ModuleHCSR501 PIR Motion Sensor Detector module is used to detect motion generally, the motion of humans within the range of the sensor. It has three pins i. e., Vcc, Dout (High Low output) and Ground. This module works on 5V DC hence Vcc is supplied with 5V DC. Dout is an output pin. It gives 0V when idle i. e., no motion is detected. 3. 3V is retrieved as output from Dout when it detects motion within the range. The range of the HCSR501 PIR motion sensor

or if you just need to detect the presence of an object by measuring strain or load applied to a surface

With CH341A chip

Package 0603 Mounting Type PCB Mount Value 100 ohm Wattage 1/4 Tolerance ±1%

shockproof

Female to female connector

Chargers and power supplies

Collector-Emitter Voltage VCES Max

This is a 2

SS24 is also known for its low forward voltage drop and good surge capability

0A Output Signal 3

19 Latch Enable (LE) 11 Output Enable 1 Power Supply (VCC) 20 Ground (GND) 10

Reading: 1999 LCD Display Size: 14mmx47mm Jaw Size 50mm Size: 235mmx96mmx46mm Security Level CAT II 1000V/ CAT III 600V