BS ISO 2100-102. Aerospace elements of electrical and optical connection. Test methods - Part 102. Examination of dimensions and mass

This British Standard describes methods of test for the ignitability of bedcovers and pillows when subjected to smouldering and flaming types of ignition sources of differing severities

The scope of the test method specified in BS EN 1601 includes petrol with higher total oxygen content and with higher oxygenate contents than mentioned in the former edition

The actual test requires high power and needs a dedicated test set up

Triaryl phosphate ester turbine control fluids are difficult to ignite and show little tendency to propagate a flame

Note 2: BS EN 12285‑1 is not applicable for the storage of liquids having dangerous goods classes because of the special dangers involved

PAS 93:2011 is a best practice guide for organizations that develop products for clinical applications

Additional requirements for warning and safety notices

002 µg/l without pre-concentration is the application of atomic fluorescence spectrometry (see ISO 17852)

BS IEC 62715‑5‑1 specifies the necessary conditions and methods to measure the optical performance of a display in a bent state

Some of the key characteristics of the LIN protocol are signal-based communication

EN 60603-7-4

This method enables the tester to determine the effects of the test substance on the coating and