Loctite EQ CL28 CureJET 405 LED Light Source - 405 NanometerWhen to Use the Loctite EQ CL28 Curejet 405nm LED Light Source Use the Loctite EQ CL28 LED light source for curing UV adhesives, materials and coatings at 405nm wavelengths. This LED light source is used with the complete Loctite Curejet LED light curing system. Details The Loctite EQ CL28 CureJetTM LED Spot 405 nm system is Loctite's highest powered system that offers significantly wider cure area and higher curing intensities as compared to our

Additional Information on the 50ml B-System Cartridges

The high-volume dispensing option is a larger version of the low-volume option and can meter up to three to four quarts of unmixed two-part resin per minute at 45cc per shot

It offers a long life cycle and precise shot control when used in conjunction with the TS500R digital controller

(1) 3/4" x 15' Hydraulic Hose

High Intensity UV Lamp

Loctite 3974 Adhesive Technical Data Sheet

Inner Diameter (ID): ~20mm

Dispense Valve: Handheld Diaphragm Valve

and 600ml F System cartridges

35 mm - 50

Power supply 20 V – 28 V DC

3lb (136g) Fluid Inlet 1/8” NPT Fluid Outlet Cone Spray Nozzle Mounting 1/4-20UNC-2B Maximum Fluid Pressure 100psi (6