Prefabricated reinforced components of autoclaved aerated concrete1 Scope This European Standard is for prefabricated reinforced components of autoclaved aerated concrete to be used in building construction for: a) Structural elements: loadbearing wall components; retaining wall components; roof components; floor components; linear components (beams and piers). b) Non structural elements: non loadbearing wall components (partition walls); cladding components (without fixtures) intended to be used for external

Network designers

BS EN 289 specifies the essential safety requirements for compression moulding machines and transfer moulding machines for the moulding of plastics and/or rubber with a closing movement of more than 6 mm

It specifies how to use health and safety information to:

b) Mobile remote handling devices:

5 MPa to 3 MPa

Four types of capillary pipettes are specified in BS 1428-D4

This method is limited currently to unfaced homogeneous materials

— organic water-dispersible formulations as supplied or as prepared in the laboratory by dilution of concentrates

Lightning current parameters

35 mm tape as defined in IEC 61834-1 for recording MPEG-2 streaming HD signals

which extends the traditional digital input and digital output interfaces as defined in IEC 61131‑2 towards a point-to-point communication link

German and French section types were in different documents with no clear connectivity