Tapping collets ER ER25 | 430G | < 15µm | 9 x 7Application: For machines with rigid tapping. For safe clamping of taps.

With drivers

clamping depth = -

For the inspection of machine tools according to ISO recommendation R230 or for testing the tool spindle

Inch/Metric conversion

- Auto/manual shutdown

There is no need to set the zero position each time the caliper is used as the origin setting is retained even when the caliper is switched off

Metal housing with rotating lever gauge

Reduction for mounting tools with straightshank

E3= 5 pieces

Wherever reduced interference contours are required

Ersatz-Reinigungs-Propeller Typ 160mm

For collets KPS-system