PCD-3D ball nose end mill d= 8,0 / r= 4,0 / L3= 24 mm / Z= 2 BESTSELLERPCD 3D ball nose end mill d= 8,0 r= 4,0 L3= 24 mm Z= 2 BESTSELLER

Tungsten carbide burr uncoated SPG/ HP-1 d1=8 / l2=20 / d2=6 / l1=65mm

2 / L2=69 HA Bronze Line Split Point - Valuetool

Tungsten carbide burr Blue-Tec coated ZYA/ HP-4 d1=3 / l2=14 / d2=3 / l1=65mm

8/L3= 196 HAK NHC-7000 Alternativ 220392

Solid carbide HPC end mill up to 60 HRC d= 10

cast iron Powdersteel 25 Insert- 50

Tungsten carbide burr uncoated KUD/ HP-5 d1=4 / l2=3

5 / L3= 23 mm HA without IC DCC 0318

5's Burr-Set 10mm/ uncoated HP-3 PRO Performance 82 BESTSELLER

0/ l2= 14/ d2= 3/ l1= 75mm BESTSELLER

For use on static and driven toolholders via threaded connector 1/8"

5 / L3= 43 HA TM-8 Value Tool