Marshall Dual FootswitchThis pedal is a dual latching footswitch for Marshall amps that take a dual 1 4" footswitch with LEDs. Please note if your Marshall amp's stock footswitch does not have LEDs then this footswitch will not be compatible with your Marshall. The pedal's LEDs are powered via the cable connection from the amp. You will need a stereo 1 4" cable to connect the pedal to your amp. The pedal is built with: Aluminium enclosure Neutrik plug sockets DPDT heavy duty

The pedal's LEDs are powered via the cable connection from the amp

great for acoustic guitars with piezo and microphone pickups or the Rickenbacker Rick-O-Sound plug

One of the simplest and most effective utility pedals available

The 2 gang patchbox has a side to side socket layout and is totally passive so no power required

Size: 20mm(H)x65mm(W)x110mm(D)

With the pedal being active means that there will be no signal loss when the input signal is split to both outputs

Modfactor and Pitchfactor pedals

This is a latching footswitch

The Eventide is set to work with normally open switches by default so that is what we have gone with

1mm 9v (centre negative) DC socket using an adapter (not supplied)

Please note this option is not possible with soft touch footswitches

Due to the single switch function of this pedal it is not possible to have a status LED