Hi-Flame Graphite Inset Boiler Baffle PlateThe boiler baffle plate for the Hi Flame Graphite Inset is a heavier cast iron component fitted to the boiler variant of this inset stove. It performs the same function as a standard baffle, deflecting combustion gases to maximise heat extraction, but is sized to accommodate the boiler configuration. Replace when cracked, badly warped, or when the stove's output has dropped noticeably. Compatible with: Hi Flame Graphite Inset Boiler multi fuel stove

protects the boiler components

and smoke escaping into the room

This set is sized for the newer version of the Victoria

This part is specific to the boiler version of the Precision III and is not interchangeable with the non-boiler model's inner grate

Part type: blanking plate

or the surface finish degrades significantly

fastened with a securing screw through the door

The ash lip is the cast iron ledge at the base of the door opening that retains ash inside the firebox when the door is open

It is a simple job that makes a noticeable difference to stove performance

Check your existing bricks against the sizes listed above before ordering

The door catch locates on the door or door frame and engages when the door is pushed closed

The door rope seal on the Mulberry Joyce runs around the inside of the door frame