Fuel Filler Hose 51mmFuel Filler Hose 51mm Technical Details Manufactured from Nitrile Butadiene Rubber (NBR) a synthetic rubber compound with excellent resistance to Fuel, Oil, Aromatic solvents and Alcohols. Supplied in 100mm increments (i. e. 100, 200, 300mm) up to 1 Meter. Operating temperature 20C up to +100C. Single ply Polyester fabric reinforced. Wall thickness approximately 4. 5mm. Commonly used for: Fuel and Lubricant transfer.

1 x FMDVV5012 Valve

Each brake line is hand built in house at our workshops in Gloucester (UK) using only the best available 95PVC coated Stainless steel braided PTFE hoses and machined Stainless Steel end fittings resulting in a brake hose that will perform under the most extreme and harsh conditions

The laser cut radiator surround

1 x FMDV35 Valve with Yellow Spring

We've torture-tested our gauges to the extreme

PowerAlign Camber Bolt Kit (10mm)

it was only obvious we should further develop on another of Hyundai’s popular performance N platforms

The actuator can be assembled with a stronger spring upon request for tuned vehicles

This Blow off or Dump valve kit is specifically designed for the Renault Clio 1

The FMINDK38 is the cold air induction system for Ford’s latest generation 1

To confirm fitment

smoother transition between the turbo inlet hose and compressor housing inlet