Marine energy. Wave, tidal and other water current converters - Guidelines for the early stage development of wave energy converters. Best practices and recommended procedures for the testing of pre-prototype devices1 Scope This part of IEC TS 62600 is concerned with the sub prototype scale development of WECs. It includes the wave tank test programmes, where wave conditions are controlled so they can be scheduled, and the first large scale sea trials, where sea states occur naturally and the programmes are adjusted and flexible to accommodate the conditions. A full scale prototype test schedule is not covered in this document. Bench tests of PTO (power take off)

there are a few additional tasks to be performed

This method is useful for evaluating the scuffing load capacity potential of semi-fluid gear greases of NLGI classes 0 to 000

This International Standard does not apply to nuclear power plants

building on the concepts and the hierarchical architecture

Manufacturers of equipment and components used for gas distribution

which are covered by IEC 61243-5)

Such control is an important preventive measure that will minimize the need for future conservation interventions

and solutions to

What is BS EN 14786-Determination of resistance to penetration by sprayed liquid chemicals

The breakage of heat soaked thermally toughened soda lime silicate safety glass caused by other influences is not considered in BS EN 14179-1

and installation of pressure relief devices

This document provides a general framework for improving the quality and comparability of methods for assessing the contribution of civil engineering works and their related external works to sustainable development based on a life cycle approach