Arducam OV9281 MIPI 1MP Monochrome Global Shutter Camera for Raspberry Pi (B0162)Arducam OV9281 MIPI 1MP Monochrome Global Shutter Camera Module for Raspberry Pi (B0162) The Arducam monochrome (B&W) global shutter 1280x800 resolution OV9281 MIPI camera module is mainly designed for Raspberry Pi boards, and it can be connected directly to RPis CSI 2 camera interface without additional hardware. This camera is based on 1 4 inch Omnivision OV9281 image sensor which adopts OmniPixel3 GS technology to provide full frame, sub sampled,

2MP global shutter Color camera module which can be operated in its default mode or programmed for frame size

When the shutdown mode is engaged

- Capture and analyse infrared (IR) signal from remote control

Package Includes:

Local & cloud storage

Reset button for base board

Buyers guide

Boost 4 click provides an adjustable output voltage through the SPI DAC

1 (computer-side simulation into a serial port)

This board also uses the DTR line from the FTDI IC to support the auto-reset function when a new sketch is downloaded to the processor – eliminating the need a reset button on the TinyLily Mini

Electrode Properties Electrode Type Combination Single-Junction (pH) pH Measurement Range 0 to 14 Electrode Response Time Max 10 s Operating Temperature Min 0 °C Operating Temperature Max 110 °C Physical Properties Exterior Tube Material PPS Plastic Maximum Pressure 87 psi Connector Type BNC Rear Thread Type 3/4" Pipe Thread Length 160 mm Diameter 29

Tamb=25°C : +/-0