Barnwell 12'' Scraper with Metal Ball EndThis is a Barnwell 12" scraper. The scraper has a ball end allowing you to add more pressure when scrapping The scraper is 4" 100mm wide The scraper has an overall length of 300mm

The trowel has a wood handle

The mag drill extension bar also has a hole running all the way through for a cooling fluid tube to run down if you have a need for one

The scarIfier is stainless steel so it will be rust free

5mm notched trowel blades to be used with adhesiveThe blade is cut at an angle to allow better control when spreading the adhesive

2" wide and 1/2" high (100mm x 50mm x 13mm)

The scribe allows you to mark on the the walls profile or door threshold on to the floor covering eaiser

The plier is 200mm long with a soft grip VDE handle

152mm 6" Inside

It has been designed to assist the installer when removing stuck down materials from sub floor

as well as to tuck carpet at the wall between the base board and the tackless strip

Only wash it by hand and allow it to dry naturally

The bevel is 300mm 12" long and has a brass Inlay Made in Sheffield