Cube 40XL/80XL FootswitchThis pedal is designed to be used with the Roland Cube 40XL and 80XL amps, it is not compatible with the Cube 80X, 80GX or 40GX. The pedal is based on having five of the Boss FS 5Ls (set your amp to latching) and one FS 5U footswitch. The switches control the amp's EFX, Reverb, Delay Mute, Channel, Solo and Tap functions. The front switches are set at a lower height to the back switches in order for them not to interfere with each other. The pedal is

The 3 gang patchbox has a side to side socket layout and is totally passive so no power required

This is a dual footswitch with the left footswitch used as a Favorite Switch and the right soft touch switch as a tap tempo for two compatible Strymon pedals

in the options above you can select for them to be coloured if you would prefer them

all of the options use a soft touch footswitch

this is so you can have them behind pedals or switchers in the row in front and have the risen pedal placed over the front pedal’s rear sockets

you can add a Bright Onion TRS cable to the order above

The second switch activates both loops together in series

Each pair of sockets can be used as mono or stereo and are isolated to avoid ground loops

as this works best if the insert loop is being used for a volume pedal or four cable method

so switching one will not affect the status of the other loops

The front two switches are set at a lower height to the back switches in order for them not to get in the way of each other

There are two toggle switches on the side of the pedal