MAPIR Camera - Visible LightThis camera sees visible light just like our eyes do. A visible light filter is used for capturing a normal RGB color image for surveying and comparing to a NDVI graded one. It can be used for orthophotography where many photos are combined to generate a 3D model. Camera captures a photo every 3 seconds. For best results, we recommend a survey overlap of at least 85% front lap and 70% side lap and a maximum 5f s (1. 5m s) speed for every 65ft (20m) of

Does not come with Black Lens Surround or screws

We'll swap good parts in until we determine exactly what the issue is and contact you to let you know what is wrong

5g) 15g Angle of View (V*H*D) 65 x 82 x 92 degrees Aperture (f Stop) 2

[Summary] Specifications:

5 60d HFOV 10MP (No Distortion) Lens with Red+NIR (NDVI) filter installed

not the bottom like the stock lens mount

Picture Below Shows 5

and varies based on which lens you purchase

the 4-camera rig

You can use the stock antennas and achieve ~2-3x the stock range

Please choose below if you want:

This is the same filter that most stock/original cameras have