HUSQVARNA® VIKING® Blindhem & Lace FootThe Blindhem & Lace Foot is perfect for sewing invisible hems and for applying lace. The hem is sewn, overcast and trimmed in one step. Blind hem: 1. Set the overlock machine for the desired stitch. 2. Snap on the Blindhem Foot. 3. Fold and press the hem in place. Turn the hem back on itself toward the right side of the fabric. Leave (6mm) of the edge exposed. 4. Place the hem under the foot with the fold against the guide on the foot. 5. Loosen the

Hint: The heavier the thread

this accessory foot gives you a professional finish

The Beading Foot smoothly guides beads and pearls through a channel on the foot for easy application on garments or crafts

and construct seams in one step

the side where the seam allowances have been pressed to

Slide stitch plate back in place and raise feed teeth

Key Features includes: • 8" Bent Tailor Scissors • 6" Appliqué Scissors • 4

Cut bias strip wide enough to wrap around two cords plus seam allowance

creative vision™

leaving a short tail of trim behind the needles while sewing

The Three Hole Yarn Foot will easily guide the cords or yarn through the openings in the front of the foot back through the groove under the presser foot

If you are sewing on a mechanical machine or an older computerized model