PFAFF® Taping FootThe Taping Foot is used to apply seam tapes to seams to prevent stretching. It is especially good for stabilizing shoulder seams. With this foot you can reinforce and construct seams in one step. How to use: 1. Set the overlock machine for the 4 thread overlock. 2. Place the seam tape in the guides on the foot. 3. Adjust the screw to fit the width of the tape. 4. Snap the taping foot onto the machine. 5. Sew the seam. Note: Works best with (8mm) seam

Removable accessory tray – keep all of your accessories handy

Compatible with the PFAFF® hobbylock™ 2

The Zipper Foot is your most important tool for perfectly stitching a zipper in place

cut the excess of fabric in beginning of binding

We suggest purchasing a zipper at least 1 1/4"" (3 cm) longer than the zipper opening

Place the piping along the seam line on right side of fabric

The middle mark gives a 9/16" (15 mm) buttoning edge

stretches 6 to 12 mm wide elastic and sews it in place

and lingerie

250 Stitches

Instructions

Compatible with the following machines: 8