24B 1-NO107 - RENOLD 1 1/2 Inch Pitch Premier Standard LinkFor use with all sizes and types of chain where optimum security is desired. The link is supplied with bearing pins riveted into one outer plate. The other outer plate is an interference fit on the bearing pins, the ends of which should be riveted over after the plate is fitted. Press fit connecting links should only be used once; new links must be used to replace dismantled links. (See Riveting Chain Endless' for full instructions).

Specification DTD

This 6034 FAG bearing is a Open Type Deep Groove Radial Ball Bearing with a standard radial internal clearance The bearing's dimensions are 170x260x42

This NU1008-M1 bearing is a single row cylindrical roller bearing

6812 Bearing Steel Thin Section with a Bore Diameter of 60mm Open Type Normal Internal Clearance

The dimensions of the SKF NJ322ECM bearing are 110x240x50mm

719 10 CD /P4A DG A Series - SKF - Extremely Light Bore Size - 50mm 15 Degree Contact Angle Precision Rating Duplex Universal Light Preload

This LWHG30C3R2000T1HS2 is a high rigidity ball type series linear way with a rail length of 2000mm

73 03 B E GA P 73 Series - Medium 17 mm - Bore Size Contact Angle Single Row Bearing with a 40° Contact Angle Optimized Internal Design Universal Bearings

This 7006CDGA/P4A bearing is a Super Precision angular contact bearing with a 15° contact angle and a high capacity design

NU 10 06 Two Flanges on Outer Ring and No Flanges on Inner Ring Extra Light Series 30mm - Bore Size Normal Radial Internal Clearance

This 6830DDU bearing is a Sealed Thin Section Deep Groove Radial Ball Bearing with a standard radial internal clearance

This 7210CTRSUMP3 bearing is a Super Precision angular contact bearing with a 15° contact angle and a phenolic cage