Mining and earth-moving machinery. Rock drill rigs and rock reinforcement rigs - Safety requirements1 Scope This document specifies the safety requirements for rock drill rigs and rock reinforcement rigs designed for the following underground or surface operations: a) blast hole drilling; b) rock reinforcement; c) drilling for secondary breaking; d) dimensional stone drilling; e) mineral prospecting, e. g. utilizing core drilling or reverse circulation; f) water and methane drainage drilling; g) raise boring. NOTE Rigs can be designed for more than

you can choose the right sampling method based on the material liquid at either high or low temperatures in pipelines

Leak detection lining kits and leak detection jackets kits intended to be used to create an interstitial space or leakage containment in single skin underground or above ground

The recommended measuring methods to verify whether the requirement has been fulfilled

Particular care needs to be taken before using machines conforming to this standard for compressive tests on small specimens

text processing

This Technical Specification has been prepared to be a harmonized standard to provide one means for the mechanical design and theoretical verification of cranes to conform with the essential health and safety requirements of the Machinery Directive

starting from a straight-ahead

in the case of two or more quality characteristics

such that incidents of leakages and overall product failures are minimized

cold starts and decompression surges)

EN 50325‑4 specifies the following particular requirements for CANopen:

6 - Moulded pulp packaging about