Airgas Single Stage Brass 0-50 psi General Purpose Cylinder Regulator CGA-580This general purpose, single stage regulator is well suited for closely monitored, short run work. The stainless steel diaphragm makes it suitable for analytical applications. The regulator has a unique design to reduce weight and make the regulator more durable. The composite bonnet and the outlet valve are incorporated into the regulator body to reduce weight. The external nickel plating, along with the composite bonnets, allows the exterior

This series of regulators is used for applications requiring high gas flow rates and a compact design

This sweeping action prevents any drop out or change in the gas mixture and quickly removes any contaminants that may enter the regulator

Complies with NFPA 70E Electrical Arc Testing and ASTM F739-12 for Permeation of Liquids and Gases

Bar Stock Bodyprovides low internal volume

The metal-to-metal diaphragm seal prevents contamination by eliminating the need for a soft seal and provides a leak-rate design of less than 2 x 10-8 ccs helium

two-stage regulators is recommended for non-corrosive analyticaland process applications where precise pressure control isrequired

Equipped with cinch straps on legs and thermal adjustable buckles

where precise pressure control and low flow rates are required

These regulators are typically used in conjunction with other high-pressure regulators or on house-line systems that limit inlet pressure to 250 psig (except on model N570K the inlet pressure limit is 10 psig)

Paddles meet MUTCD standards

Airgas®’ unique line of Cyclone Technology pressure regulators are designed to preserve the specific gas mixture

Each regulator is capable of withstanding an internal vacuum and is provided with a diffusion-resistant